Frequently Asked Questions
1. How much does this system cost?
Ans: Depending on the required preparation, and meterage of areas to be coated.
2. What is the system made up of?
Ans: Solvent free epoxies and acrylic and UV protective non-yellowing finishing coats.
3. How thick is the finishing product?
Ans: From 2mm - 4mm depends on number of coatings.
4. What advantages are there to using this system?
Ans: Long lasting/ Decorative/ Low maintenance cleaning/ Will not harbour bacteria/ Antistatic/ Seamless/ Won't crack/ Chip or peel/ Can apply on tiles or wood and any surfaces.
5. Where is it used or applied?
Ans: Any surfaces, be it wall, floors, ceilings and tops.
6. Where is it used?
Ans: Hotels, hospitals, supermarket, club house, aged care facilities, bathing areas, food preparation areas, living rooms and halls.
7. Is it a safety floor/ non-slip?
Ans: Yes, in cases where the surface are required to have a non-slip surface, additives are included for this purpose. Also our chips can be broadcast in heavy mode acting as non-slip system. It has been successfully applied internally and externally.
8. How long does it takes to apply the total system?
Ans: This total epoxy system requires time to cure under normal weather conditions. This is to ensure that the curation of the total system is good and that it will do what is said, and due care by the customer will only enhance its life span.